|
Philips Lighting Philips are a long established Dutch based multi-national company producing 100's of types of electrical products for the domestic and commercial markets, including streetlighting lanterns and equipment.
This Philips MA30 lantern for large elliptical mercury or HPS lamps is one of several still in use at the Thoresby Colliery in Nottinghamshire.
A Philips MA50 MKI 135w SOX lantern with original type of none-geared shoe, Tipton, West Midlands Philips MA60 lantern
Remote-geared Philips MA60-00 180w SOX lanterns on twin-arm brackets in use on the A38 in Derbyshire in early 2004. This is now the last SOX lit section of the A38 between Fradley in Staffordshire and Burnaston in Derbyshire; the rest of this installation was converted to high pressure sodium lighting in 2005-6.
One of the many hundreds of MA60's removed and scrapped during the 'SON for SOX' conversion on the A38 between Fradley, Staffordshire and Burnaston in Derbyshire. This MA60-GO 'geared' example lying in the central reservation of the A38 at Branston in December 2005, illustrates where the 'shoe' containing the control gear was once fitted. Philips MA90 lantern
1970's remote-geared Philips MA90-00 MKI lantern for 90w SOX lamps. This very clean example is seen in Calverton, Nottinghamshire in May 2006.
A Philips remote-geared MA90-00 90w SOX lantern photographed in Farnham, Surrey in July 2005. This is the MKII lantern with the later type of spigot mounting bracket; the MKII lantern was introduced by Philips in 1982.
Pictured in Chilwell, Nottinghamshire in 2005 is a MA90-GO integral-geared lantern for 90w SOX lamps. The Philips MA series of lanterns is now redesignated as the Philips SRS201series.
Philips MI36 lantern for 55w SOX lamps; this example was pictured in the Mapperley District of Nottingham in July 2005. Philips MI57 HPS lantern
Mounted on a hockey-stick column in Carlton Hill, Nottingham is a Philips MI57 lantern for 70w SON lamps. This lantern uses the same canopy and bowl as the Philips MI50 lantern for 35w SOX lamps.
This Philips MI57 was more or less new when photographed at night in Toton, Nottinghamshire in 2005. Philips SGS101 'Streetfighter' lantern
These GRP canopied Philips lanterns are intended to be vandal resistant lanterns, and to a degree they are quite hardy fittings. As such, they are often to be found deployed in places where damage is likely to occur through vandalism; for example, in alleyways, on footpaths, and on inner city streets. This weathered example uses a 70w SON lamp and is situated in a recreational park in Toton, Nottingham, where it appears to have thus far survived intact.
Philips SGS101 for 70w SON lamps on a pole mounted bracket with control box in Tankersley, South Yorkshire. The lantern's control gear is mounted inside the lantern itself, so the control box mounted on to the telegraph pole will only contain the electrical cut-out device.
The Philips SGS102 lantern is just a bigger version of the SGS101 'Streetfighter' lantern, but is for use with 150w/250w HPS lamps. This example is pictured on a sunny day in Kimberley, Nottinghamshire, in July 2005
Dependant on the lamp wattage, this large high pressure sodium fitting is either a Philips SGS201-150w or SGS201-250w lantern. It stands with others of the type at the gates to Thoresby Colliery in North Nottinghamshire. The first 'S' in SGS201 means that the lantern is to be used with high pressure sodium lamps, or in the case of mercury lamps it would be a HGS201; the 'H' denoting use with mercury lamps. My thanks to Andrew Stanley and Tim Luckett for this information. Philips SGS203 lantern
The Philips SGS203 is a sturdy lantern that sports a cast aluminium chassis and GRP canopy; the control gear being attached to the chassis inside of the lantern. The SGS203 is a very common lantern and can be found all over the UK and Europe. This Nottingham City Council owned example in the Mapperley District of the City uses a 70w SON lamp, but the lantern is available for use with larger wattage HPS lamps up to 250w. The lantern can be either column top mounted, as in the picture, or bracket mounted for use on out-reaches.
This flat lens Philips SGS203 is seen in use one evening on a motorway services car park on the M42 in Worcestershire. The lantern is burning a 150w SON-T lamp. Philips SGS204 lantern
An SGS204 flat-lens lantern for use with 250/400w SON lamps is seen in Basford, Nottingham in June 2006. Similar to the SGS203, the SGS204 is actually a much larger and heavier lantern, but uses a cast aluminium chassis and GRP canopy similar to the SGS203. Apart from being physically bigger than the SGS203, the SGS204 is easily recognisable by the 'step' seen on the underside of the chassis. Philips SGS253 'Iridium 'lantern
Deep-bowled Philips SGS253 Iridium (150w SON lamped) lantern at Hucknall, Nottinghamshire.
Shallow-bowled Philips SGS253 Iridium (150w SON lamped) lantern at Hucknall, Nottinghamshire. Philips SGS305 and SGS306 'Trafficvision' lanterns
SGS306 'Trafficvision' flat-lens lanterns are pictured on a twin armed bracket at Toddington services on the M1 Motorway on a hot Summer's day in July 2005. Another very common lantern to be found in the UK is the Philips SGS305 and SGS306 'Trafficvision' range of lanterns for use with HPS and CDM-TT Metal Halide lamps. The SGS305 is the smaller of the two lanterns and is designed for use with smaller wattage HPS lamps. The SGS306 is a larger version of the lantern and is normally used with 250 or 400w lamps. The lantern is available with flat cut off bowls, as above, or 'blown' plastic bowls. Although the lantern is similar in shape to the WRTL 'Vectra' lantern, it is easily recognised by the aluminium 'quadrant' shaped fixing bracket protruding beneath it for column top mounting, or for fixing onto out-reaches.
Philips SGS306 'Trafficvision' lantern with 'blown' plastic bowl on the A52 near to Ruddington, Nottinghamshire in June 2006. Philips FGS105 for 55w CFL lamps
The FGS105 looks like a stretched MI36 lantern; this one is pictured day-burning in Chester in April 2006. Philips FGS224 'Residium' lantern for 36w CFL lamps
A Philips FGS224 'Residium' lantern for 36w PL-L lamps, basking in the early morning sunshine at Watnall, Nottinghamshire in June 2006. The Residium lantern uses an electronic ballast to power the lamp, which gives the lamp a smoother start-up, and eliminates the need for a 'starter' and 'capacitor' in the circuit. Philips FGS225 'Residium' lantern for 55w/80w CFL lamps
This Philips MO-62 catenary lantern for 2 x 180w SOX lamps was photographed on the M25 near Heathrow Airport in July 2005. These lanterns were first used to light sections of the M62 Motorway, and can easily be confused with the similar looking Phosco P415 catenary lantern for 2 x 180w SOX lamps. My thanks to Colin Grimes , Simon Cornwall, Nigel Spink, and Alex Monk for their efforts in identifying this lantern. Copyright(c) 2005 Claire Pendrous. All rights reserved. Please note that all pictures are by Claire Pendrous, or are part of the Claire Pendrous photographic collection unless otherwise stated; none of these images can be copied without obtaining prior permission.
|
